This two-die set is intended for reloading bottleneck cases and consists of a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it

This Pocket Scale is ideal for the handloader looking for an affordable rugged scale to verify weightsFeatures: 1500 Grain Capacity 0.10 Grain Accuracy Easy to Read Digital Display Rugged Design Powered by 2-AAA Batteries (Included) Check weight and Powder Pan Included One Year Warranty

The new RCBS AR Series is a must for the progressive reloader. It features a Small Base sizing die and a new Taper Crimp seating die. This combination makes reloading easier for AR-style or semi-auto shooters. The small Base sizer guarantees that the cartridge will rechamber. The Taper Crimp Seater is more forgiving when various case lengths are loaded at the same time. Case neck crimp bulges and buckled shoulders are virtually eliminated when Taper crimping is used with cannelured bullets.2 Die Set Includes:• Small Base Full Length Sizing Die • Taper Crimp Seating DieShell Holder/Shell Plate Sold SeparatelyShell Holder #32 / Item Number #RC09232Shell Plate #32 

Features dead length bullet seating with smooth accurate adjustment. Tests prove sliding bullet guides provide cartridges with the least bullet runout. When used as a dead length bullet seating die the body contacts the shell holder assuring precise uniform seating depth.Laser engraved micrometer thimble and body is easy to read with divisions representing one thousandth of an inch reads just like a precision depth micrometer. Infinitely adjustable providing precision bullet seating depth.Bullet seating stem is machined and burnished to seat nearly any point style bullet without damage or marking.The case mouth and bullet are held in perfect alignment by a floating bullet guide. The bullet guide is provided with radial clearance to allow the case and bullet guide to align perfectly with the bullet seater screw.The floating bullet guide is reversible simply unthread guide and re-install to allow seating and crimping simultaneously an exclusive feature to Lee.This bullet seating die proves accuracy doesn't have to cost a lot.

The Lee Precision Quick Trim Rifle Die was specifically designed to be used with the Lee Deluxe Quick Trim or the Value Quick Trim Case Trimmer. Each and every Lee Precision Quick Trim Rifle Die was made with the purpose of holding your brass cases securely during trimming.

The Hornady 3-Die Pistol Taper Crimp Die Set is the perfect set of tools to precisely seat and taper-crimp your pistol bullets all in a one-step process. This set of dies includes a taper-crimp seater die a pistol-style expander die and a titanium-ring full-length sizer die. If you are looking for a quick and easy way to taper-crimp and seat your bullets look no further than the Hornady 3-Die Pistol Taper Crimp Die Set. These dies are part of the Hornady Custom Grade line of custom pistol dies which features the innovative non-slip Zip-Spindle design ensuring not only a precise alignment but easy spindle-lock tightening as well.

The Hornady 3-Die Pistol Taper Crimp Die Set is the perfect set of tools to precisely seat and taper-crimp your pistol bullets all in a one-step process. This set of dies includes a taper-crimp seater die a pistol-style expander die and a titanium-ring full-length sizer die. If you are looking for a quick and easy way to taper-crimp and seat your bullets look no further than the Hornady 3-Die Pistol Taper Crimp Die Set. These dies are part of the Hornady Custom Grade line of custom pistol dies which features the innovative non-slip Zip-Spindle design ensuring not only a precise alignment but easy spindle-lock tightening as well.

The Hornady 3-Die Pistol Taper Crimp Die Set is the perfect set of tools to precisely seat and taper-crimp your pistol bullets all in a one-step process. This set of dies includes a taper-crimp seater die a pistol-style expander die and a titanium-ring full-length sizer die. If you are looking for a quick and easy way to taper-crimp and seat your bullets look no further than the Hornady 3-Die Pistol Taper Crimp Die Set. These dies are part of the Hornady Custom Grade line of custom pistol dies which features the innovative non-slip Zip-Spindle design ensuring not only a precise alignment but easy spindle-lock tightening as well.

The Lee Precision Quick Trim Rifle Die was specifically designed to be used with the Lee Deluxe Quick Trim or the Value Quick Trim Case Trimmer. Each and every Lee Precision Quick Trim Rifle Die was made with the purpose of holding your brass cases securely during trimming.

The Lee Case Length Gauge and Shell Holder comes in a wide variety of sizes to accommodate all of the most popular cartridge calibers. This set of tools is made from hardened steel to ensure a lifetime of durable performance and is precision-crafted to tight SAAMI specifications. The Lee Case Length Gauge gives you a fast and accurate way to trim your brass cases while also squaring the mouths. The shell holder is used to hold the case firmly in place during this operation and while using your Lee Case Trimmer Cutter. These tools help to ensure the maximum level of accuracy in trimming and squaring your brass cases.

Features dead length bullet seating with smooth accurate adjustment. Tests prove sliding bullet guides provide cartridges with the least bullet runout. When used as a dead length bullet seating die the body contacts the shell holder assuring precise uniform seating depth.Laser engraved micrometer thimble and body is easy to read with divisions representing one thousandth of an inch reads just like a precision depth micrometer. Infinitely adjustable providing precision bullet seating depth.Bullet seating stem is machined and burnished to seat nearly any point style bullet without damage or marking.The case mouth and bullet are held in perfect alignment by a floating bullet guide. The bullet guide is provided with radial clearance to allow the case and bullet guide to align perfectly with the bullet seater screw.The floating bullet guide is reversible simply unthread guide and re-install to allow seating and crimping simultaneously an exclusive feature to Lee.This bullet seating die proves accuracy doesn't have to cost a lot.

The Lee Precision Quick Trim Pistol Die was made for the purpose of holding your brass cases securely in place during trimming. These dies were specifically designed to be used with the Lee Deluxe Quick Trim or the Value Quick Trim Case Trimmer. To make the most of your Lee Precision Quick Trim Pistol Die use the die to hold your rifle cases firmly in place while the cutter turns

Transform your Lee Carbide Factory Crimp die into the most accurate and easiest to adjust bullet seating die ever made. Simply remove the stock adjusting screw and replace with cartridge specific adapter.You have all these great benefits: Uniform dead length bullet seating Easy crimp adjustment die is never moved after installation Bullet seating depth is micrometer accurate Cartridge is post-sized after seating and crimping Saves an extra step.Perfect for progressive or turret press users with limited stations. Crimping seating and post sizing in one step.

RCBS pioneered and developed 3-Die Sets for straight-wall rifle and pistol cases. The Carbide Sizer Die sizes the case and de-primes (the carbide sizer ring eliminates the need to lubricate). The Expander Die expands the case to the proper diameter to accept the bullet and it imparts case mouth flare/bell for bullet feeding. The Seater Die seats the bullet and Tamper crimps.

Transform your Lee Carbide Factory Crimp die into the most accurate and easiest to adjust bullet seating die ever made. Simply remove the stock adjusting screw and replace with cartridge specific adapter.You have all these great benefits: Uniform dead length bullet seating Easy crimp adjustment die is never moved after installation Bullet seating depth is micrometer accurate Cartridge is post-sized after seating and crimping Saves an extra step.Perfect for progressive or turret press users with limited stations. Crimping seating and post sizing in one step.

Lee 40 S&W Powder Thru Expanding Die charges the case while expanding the case mouth. Used with powder funnel adapter or the Auto Disk or Pro Auto Disk Powder Measure.

RCBS pioneered and developed 3-Die Sets for straight-wall rifle and pistol cases. The Carbide Sizer Die sizes the case and de-primes (the carbide sizer ring eliminates the need to lubricate). The Expander Die expands the case to the proper diameter to accept the bullet and it imparts case mouth flare/bell for bullet feeding. The Seater Die seats the bullet and taper crimps.

Lee 40 Mag Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability The adjusting screw quickly and easily sets the desired amount of crimp. Trim Length is not critical so this extra operation takes less time than it would if cases were trimmed and chamfered. A firm crimp is essential for dependable and accurate ammunition as it eliminates the problems of poor ignition of slow burning magnum powders.

Lee 44 Magnum Collet Style Crimp Die. NOTE: this die is not carbide.

RCBS pioneered and developed 3-Die Sets for straight-wall rifle and pistol cases. The Carbide Sizer Die sizes the case and de-primes (the carbide sizer ring eliminates the need to lubricate). The Expander Die expands the case to the proper diameter to accept the bullet and it imparts case mouth flare/bell for bullet feeding. The Seater Die seats the bullet and taper crimps.

The Lee Carbide 3-Die Set is a perfect example of Lee's commitment to quality these dies are built to provide many years of durable performance guaranteed. If you need a set of high-quality carbide dies to improve your reloading operation and to reduce hassle look no further than the Lee Carbide 3-Die Set.This set of carbide dies features an unbreakable decapper a free-floating bullet seater an integrated stuck case remover and finger-adjustable locking rings all kept in a handy storage case. As an added bonus these contour-ground dies don't need case lube.

RCBS pioneered and developed 3-Die Sets for straight-wall rifles and pistol cases. These sets for straight wall pistol cases build off of that legacy. Each set features a steel Sizing die. The Expander die expands the case to the proper diameter to accept the bullet and also imparts case mouth flare/bell for easy bullet feeding. The bullet seating die then seats the bullet and puts on the appropriate crimp for the round being loaded. Features a hardened steel Sizer Die (case lubrication required) Expander Die to properly expand case to accept bullets Taper Crimp Seat Die for Proper cartridge headspacing Comes in a Green Box All RCBS dies are machined to exacting tolerances hardened and finished to the highest standards in the industry 

Lee 460 S&W Collet Style Crimp Die in 7/8 x 14" thread. 460 S&W Collet Style Crimp Die. Incorporates a collet to apply a rifle type crimp to the case. Makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove as the collet is so powerful it will form one. NOTE: This die is not carbide.

Lee .500 S&W Collet Style Crimp Die.

Includes the Breech Lock Challenger Press and one Breech Lock quick-change bushing. You get a complete powder handling system with the most convenient and repeatable Perfect Powder Measure. Plus the Lee Safety Scale the most sensitive and safest of all powder scales and fill your case with the included Powder Funnel.Case Preparation Tools include the Lee Value Trim case trimmer to trim on your reloading press (order cartridge specific Quick Trim Die separately) and a Cutter and Lock Stud to trim your cases by hand. If utilizing the cutter and lock stud order the correct Case Length Gauge for the calibers you will be loading. An included Chamfer Tool chamfers the inside and outside of the case mouth and a tube of premium Sizing Lube is included. A small and large Primer Pocket-cleaning Tool completes the case preparation package.But that’s not all! You get the Large and Small Safety Prime. Prime with push button convenience and is safe with all brands of primers. Never touch the primer from box to the case.Compare it to others priced at hundreds of dollars more. Reloading saves money and you save right from the start with Lee equipment.Note: Press shown mounted on optional Lee Bench Plate (#90251).