The BANISH 22 suppressor is designed for use with rimfire pistols and rifles chambered in .22 caliber and smaller. This includes .22 Hornet, .17HMR, and even 5.7x28. It's even rated for full-auto! Using 1/2x28 threads for direct attachment, the BANISH 22 is made of lightweight titanium, weighs just 4.1oz, is 1" in diameter, and only 5 " long. This means you'll barely even notice that the BANISH 22 is on the end of your gun - except when it comes to sound reduction. Tests have shown that the BANISH 22 brings the sound down to about 120 decibels, making it barely louder than a BB-gun. Essentially, this is as close to "Hollywood quiet" as you can get. The Banish 22 at the muzzle tested at 116.8 dB on a 22LR with a 16" barrel and 117.6 dB at the muzzle on a Ruger Mark IV. Since rimfire ammo uses projectiles that are not jacketed, lead buildup and carbon fouling are a real concern in a rimfire silencer. Over time without cleaning, it's possible for a .22 suppressor to completely fill with lead and carbon, rendering it ineffective for sound suppression and adding considerable weight. The BANISH 22 was designed specifically to maximize your time shooting and minimize your time cleaning. Inside the tube are eight baffles that are engineered for a precise fit to keep lead debris and carbon buildup at an absolute minimum. This prevents the debris and buildup from reaching the tube, which causes components to fuse together. Once disassembled, cleaning couldn't be simpler: toss the baffles in a tumbler, ultrasonic cleaner, or use good, old-fashioned elbow grease. With indexing lines on each baffle for easy realignment and reassembly, the BANISH 22 is the only rimfire silencer on the market that is user-serviceable from both ends. If you're looking for the perfect first-time silencer purchase, the BANISH 22 is a great option. It's ideal for varmint shooting, small game hunting, target practice, and more.

Made of titanium and Inconel for the ultimate combination of durability and weight reduction, the BANISH 338 weighs only 17.5 oz and is just 9.1" long. Testing has shown the BANISH 338 provides sound reduction of 33 decibels, proving that you can have the best build quality and the best sound performance. The BANISH 338 is a direct thread suppressor with a ported Inconel blast baffle and eight titanium baffles of increased thickness for better durability with large calibers. The BANISH 338's accuracy baffle ensures that you'll have minimal POI shift for long-range shots. This user-serviceable suppressor can be easily disassembled for cleaning. Since it's made of titanium and Inconel, you can easily clean the baffles in a tumbler, ultrasonic cleaner, or by hand with a brush and solvent. Reassembly is just as easy, thanks to the keyed and indexed baffles. This guarantees that each one will be lined up perfectly for optimum performance. The BANISH 338 is the perfect choice for rifle shooters who want a quieter shooting experience. Whether you're shooting 5.56/.223, .308 Winchester, or even .338 Lapua, the BANISH 338 is the best choice when it comes to rifle caliber versatility. Silencers are a significant investment, so it's a huge plus to be able to use one can on multiple different firearms in a wide variety of calibers.

The BANISH 45 is a modular silencer specifically designed for handguns and pistol caliber carbines in calibers ranging from .45 ACP down to rimfire. Testing shows the BANISH 45 suppresses a 9mm pistol by 36 decibels - far more sound reduction than the competition.Made with Titanium for the ultimate combination of durability and weight reduction, the BANISH 45 is the lightest in its class at a mere 9.6oz in the short configuration of 6.7". You can also run it in the long configuration of 8.6" and still barely notice it's on your gun because it weighs only 11 oz. Because of the BANISH 45's modular design, you can run it with eight or 12 baffles, depending on your specific needs. Ideal for 3-gun or target shooting, the BANISH 45 will help protect the hearing of the shooter and others in a shooting competition and reduce recoil for quicker second shot target acquisition. User-serviceable from both ends, this suppressor can be easily and quickly disassembled for configuration changes and cleaning. You can easily clean the baffles by hand with a brush and your favorite solvent. Reassembly is just as easy, thanks to the keyed and indexed baffles. This guarantees that each one will be lined up perfectly for optimum performance. The unique design of the BANISH 45 makes it the one suppressor to fit any pistol caliber gun. Simply swap out the pistons (sold separately) and you can attach this suppressor to any multitude of pistols or pistol caliber carbines in your collection. Silencers are a significant investment, so it's a huge plus to be able to use one can on multiple different firearms.

The two most important factors for picking a suppressor for a backcountry hunt are sound suppression and weight, and the .30 caliber BANISH Backcountry suppressor was built with those factors in mind. You get the same unmatched sound suppression and durable titanium construction as the flagship Banish 30 suppressor, but in a package that's shorter and lighter than ever before. The Backcountry is a fixed-length suppressor that measures 5.5" in length (5.7 with mount) and weighs just 7.8 ounces. That's a full 1.3" shorter and 2.2 ounces lighter than the BANISH 30 in its short configuration. That may not sound like much, but it makes a world of difference for backcountry adventurers who carefully pack their gear with size and weight in mind. Rated for calibers up to the .300 Remington Ultra Magnum (RUM), the BANISH Backcountry utilizes six baffles that drop the decibel level down to 135 dB for .308 Winchester, 137 dB for .300 Win Mag, and 138 dB for .300 RUM at the ear - all of which fall below the hearing-safe threshold. Utilizing a 1.375x24 Universal Mount, the BANISH Backcountry is a direct-thread suppressor designed to eliminate any extra weight associated with a muzzle device method of attachment, but it is also available with an optional muzzle brake attachment.

The BANISH Speed K is a 5.56 caliber suppressor set to revolutionize the suppressor industry. With clipped-wall baffles and a finned blast chamber, the Speed K ensures maximum sound reduction while maintaining optimal performance. Featuring controlled flow technology and a vented 4th baffle, this duty suppressor minimizes gas blowback for a better shooting experience. The design allows for only a 5.8% increase in blowback from unsuppressed shooting, enabling rifles to function smoothly without additional modification. Designed in partnership with Federal Ammunition and law enforcement professionals, the Speed K was built for those in uniform who demand excellence from their equipment. The silencer is constructed with 100% Inconel for durability and lower heat retention. Passing seven rounds of SOCOM testing, the Speed K is extremely durable and won't fail when it matters most. One round of SOCOM testing puts 1,440 rounds through the suppressor in a short period. Many suppressors don't pass one round of SOCOM testing, let alone seven rounds! At 4 inches in length, the Speed K is the perfect choice when maneuverability and speed are vital to a successful mission. The compact design allows for quick and precise movements in tight spaces. Creating a suppressor short in length was a primary focus when designing and building the Speed K, along with minimal blowback and extreme durability.

When Silencer Central partnered with Federal Premium Ammunition to develop a suppressor for the law enforcement market, the result was the award-winning BANISH Speed K. BANISH took that design and made it lighter for hunting, home and livestock defense, and the competition shooter. The result is the BANISH Speed K Ti that gives you a 20.6 decibel reduction. The Speed K Ti is made from durable and lightweight titanium and is perfect for AR-platform rifles. It has a 2-inch diameter and is just 4-inches long, and it only weighs 8.6 ounces. The BANISH Speed K Ti is a .223/5.56-caliber suppressor with clipped-wall baffles and a finned blast chamber. Using controlled flow technology and a vented 4th baffle, the Speed K Ti minimizes gas blowback that allows for only a 5.8% increase in blowback from unsuppressed shooting, enabling rifles to function smoothly without additional modification. It also lessens recoil, eliminates muzzle flash, and cuts muzzle rise helping make follow-up shots easier and faster.

The BTi30 is purpose-built for shooters who demand precision, reliability, and adaptability. Featuring swappable vented or sealed end caps, a HUB-compatible mounting system and external fluting for enhanced cooling, the BTi30 delivers consistent performance across multiple platforms. Each unit receives a premium C-Series Cerakote finish, available in Graphite Black, Tactical Grey or Flat Dark Earth, to ensure lasting protection and refined appearance.

The BTi30 is purpose-built for shooters who demand precision, reliability, and adaptability. Featuring swappable vented or sealed end caps, a HUB-compatible mounting system and external fluting for enhanced cooling, the BTi30 delivers consistent performance across multiple platforms. Each unit receives a premium C-Series Cerakote finish, available in Graphite Black, Tactical Grey or Flat Dark Earth, to ensure lasting protection and refined appearance.

The BTi30 is purpose-built for shooters who demand precision, reliability, and adaptability. Featuring swappable vented or sealed end caps, a HUB-compatible mounting system and external fluting for enhanced cooling, the BTi30 delivers consistent performance across multiple platforms. Each unit receives a premium C-Series Cerakote finish, available in Graphite Black, Tactical Grey or Flat Dark Earth, to ensure lasting protection and refined appearance.

US PALM EOS Series (Eye of the Storm)-a line of advanced 3D-printed suppressors engineered for class-leading performance, exceptional durability, and competitive pricing. Built with cutting-edge additive manufacturing and premium materials, the EOS lineup delivers elite suppression while adding minimal weight and offering long-term service life.

The VOID suppressors feature stainless-steel welded baffle stack construction with HUB-compatible rear threads. A key advantage of these suppressors is their modularity, allowing users to swap front caps to either a low back-pressure option or a solid cap for improved sound performance.

Diamondback Firearms DB Suppressor, 22 Caliber, 1/2X28 Direct Thread, Cerakote Finish, Black, Inconel 718 Construction, 5.625 Overall Length DBS-22i

Diamondback Firearms DB Suppressor, 30 Caliber, HUB Compatible, 5/8X24 Direct Thread Adaptor, Cerakote Finish, Black, Inconel 718 & Stainless Steel Construction, 6.505 Overall Length with Mount DBS-30i

Diamondback Firearms DB Suppressor, 30 Caliber, HUB Compatible, 5/8X24 Direct Thread Adaptor, Cerakote Finish, Flat Dark Earth, Inconel 718 & Stainless Steel Construction, 6.505 Overall Length with Mount DBS-30iFDE

Diamondback Firearms DB Suppressor, 556NATO, HUB Compatible, 1/2X28 Direct Thread Mount, Cerakote Finish, Black, Inconel 718 & Stainless Steel Construction, 5.711 Overall Length with Mount DBS-556i

Diamondback Firearms DB Suppressor, 556NATO, HUB Compatible, 1/2X28 Direct Thread Mount, Cerakote Finish, Flat Dark Earth, Inconel 718 & Stainless Steel Construction, 5.711 Overall Length with Mount DBS-556iFDE

Constructed of stainless steel or titanium (see drop-down menu), Daniel SoundGuard Powered by KGM Suppressor 1.375-24 HUB direct-thread adapters are available in in 1/2 - 28" and 5/8 - 24" TPI and provide rock-solid mounting and rapid attachment/detachment. They utilize a non-proprietary flat wrench (included) that attaches or removes the adapter to the suppressor tube or an appropriately threaded firearm muzzle in seconds-no additional or special tools necessary! Because no mounting adapters or other mounting hardware is required, these direct-thread adapters allow the suppressors to be conveniently and easily switched from one firearm to another compatible-caliber firearm with an appropriately threaded muzzle.

DEAD AIR ARMAMENT CT5P 5.56 NATO/6MM ARC DIRECT THREAD RIFLE SUPPRESSOR Introducing the CT5P Patrol™ Silencer, our first patrol-specific, gas-regulated, ultra-lightweight, and low-backpressure compact-Triskelion® baffled 5.56 NATO silencer. Engineered to meet the precise demands of law enforcement officers using semi-automatic duty rifles. It’s designed to minimize hearing-loss risk, reduce muzzle concussion in confined environments, and enhance officer survivability. The CT5P is an ultralight, compact suppressor engineered to deliver next-generation performance in a reduced-size platform. Building on proven design lessons from prior suppressor generations, it eliminates the HUB interface to achieve a shorter, lighter configuration while maintaining minimal point-of-impact shift and consistent alignment under use. Optimized for both direct impingement and piston-driven systems, the CT5P is designed to function reliably in 5.56 NATO and 6mm ARC platforms with minimal influence on bolt velocity and overall system behavior. Its internal architecture integrates a compact baffle geometry with a dedicated gas management approach to reduce backpressure and help limit operator exposure to combustion gases during sustained firing. The suppressor’s exterior geometry is engineered to increase surface area for improved heat dissipation while also reducing light signature and visible flash, even on shorter barrel configurations as low as 10.5 inches. This helps maintain a lower visual and thermal profile in dynamic or low-light environments. Designed for durability under high round counts and full-auto conditions, the CT5P leverages advanced manufacturing methods to achieve strength and longevity without added weight. Tested to rigorous standards, it is purpose-built for duty use, combining compact dimensions, thermal efficiency, and consistent performance in demanding operational environments. SPECS Caliber Rating: 5.56 NATO and 6mm ARC Energy Rating: 2200+ ft-lbs Bore Diameter: 6 mm Length: Direct Thread: 5.49” Materials: Haynes® 282® Finish: Cerakote® Diameter: Direct Thread: 1.6” Minimum Barrel Length Restrictions: No restrictions Full Auto Rated: Full Auto rated for 5.56 NATO and 6mm ARC Silencer Category: Rifle Silencers Weight: Direct Thread: 13.7 oz  

DEAD AIR ARMAMENT CT5P 5.56 NATO/6MM ARC DIRECT THREAD RIFLE SUPPRESSOR Introducing the CT5P Patrol™ Silencer, our first patrol-specific, gas-regulated, ultra-lightweight, and low-backpressure compact-Triskelion® baffled 5.56 NATO silencer. Engineered to meet the precise demands of law enforcement officers using semi-automatic duty rifles. It’s designed to minimize hearing-loss risk, reduce muzzle concussion in confined environments, and enhance officer survivability. The CT5P is an ultralight, compact suppressor engineered to deliver next-generation performance in a reduced-size platform. Building on proven design lessons from prior suppressor generations, it eliminates the HUB interface to achieve a shorter, lighter configuration while maintaining minimal point-of-impact shift and consistent alignment under use. Optimized for both direct impingement and piston-driven systems, the CT5P is designed to function reliably in 5.56 NATO and 6mm ARC platforms with minimal influence on bolt velocity and overall system behavior. Its internal architecture integrates a compact baffle geometry with a dedicated gas management approach to reduce backpressure and help limit operator exposure to combustion gases during sustained firing. The suppressor’s exterior geometry is engineered to increase surface area for improved heat dissipation while also reducing light signature and visible flash, even on shorter barrel configurations as low as 10.5 inches. This helps maintain a lower visual and thermal profile in dynamic or low-light environments. Designed for durability under high round counts and full-auto conditions, the CT5P leverages advanced manufacturing methods to achieve strength and longevity without added weight. Tested to rigorous standards, it is purpose-built for duty use, combining compact dimensions, thermal efficiency, and consistent performance in demanding operational environments. SPECS Caliber Rating: 5.56 NATO and 6mm ARC Energy Rating: 2200+ ft-lbs Bore Diameter: 6 mm Length: Direct Thread: 5.49” Materials: Haynes® 282® Finish: Cerakote® Diameter: Direct Thread: 1.6” Minimum Barrel Length Restrictions: No restrictions Full Auto Rated: Full Auto rated for 5.56 NATO and 6mm ARC Silencer Category: Rifle Silencers Weight: Direct Thread: 13.7 oz  

DEAD AIR ARMAMENT CT5P 5.56 NATO/6MM ARC DIRECT THREAD RIFLE SUPPRESSOR Introducing the CT5P Patrol™ Silencer, our first patrol-specific, gas-regulated, ultra-lightweight, and low-backpressure compact-Triskelion® baffled 5.56 NATO silencer. Engineered to meet the precise demands of law enforcement officers using semi-automatic duty rifles. It’s designed to minimize hearing-loss risk, reduce muzzle concussion in confined environments, and enhance officer survivability. The CT5P is an ultralight, compact suppressor engineered to deliver next-generation performance in a reduced-size platform. Building on proven design lessons from prior suppressor generations, it eliminates the HUB interface to achieve a shorter, lighter configuration while maintaining minimal point-of-impact shift and consistent alignment under use. Optimized for both direct impingement and piston-driven systems, the CT5P is designed to function reliably in 5.56 NATO and 6mm ARC platforms with minimal influence on bolt velocity and overall system behavior. Its internal architecture integrates a compact baffle geometry with a dedicated gas management approach to reduce backpressure and help limit operator exposure to combustion gases during sustained firing. The suppressor’s exterior geometry is engineered to increase surface area for improved heat dissipation while also reducing light signature and visible flash, even on shorter barrel configurations as low as 10.5 inches. This helps maintain a lower visual and thermal profile in dynamic or low-light environments. Designed for durability under high round counts and full-auto conditions, the CT5P leverages advanced manufacturing methods to achieve strength and longevity without added weight. Tested to rigorous standards, it is purpose-built for duty use, combining compact dimensions, thermal efficiency, and consistent performance in demanding operational environments. SPECS Caliber Rating: 5.56 NATO and 6mm ARC Energy Rating: 2200+ ft-lbs Bore Diameter: 6 mm Length: Direct Thread: 5.49” Materials: Haynes® 282® Finish: Cerakote® Diameter: Direct Thread: 1.6” Minimum Barrel Length Restrictions: No restrictions Full Auto Rated: Full Auto rated for 5.56 NATO and 6mm ARC Silencer Category: Rifle Silencers Weight: Direct Thread: 13.7 oz  

DEAD AIR ARMAMENT CT5P 5.56 NATO/6MM ARC DIRECT THREAD RIFLE SUPPRESSOR Introducing the CT5P Patrol™ Silencer, our first patrol-specific, gas-regulated, ultra-lightweight, and low-backpressure compact-Triskelion® baffled 5.56 NATO silencer. Engineered to meet the precise demands of law enforcement officers using semi-automatic duty rifles. It’s designed to minimize hearing-loss risk, reduce muzzle concussion in confined environments, and enhance officer survivability. The CT5P is an ultralight, compact suppressor engineered to deliver next-generation performance in a reduced-size platform. Building on proven design lessons from prior suppressor generations, it eliminates the HUB interface to achieve a shorter, lighter configuration while maintaining minimal point-of-impact shift and consistent alignment under use. Optimized for both direct impingement and piston-driven systems, the CT5P is designed to function reliably in 5.56 NATO and 6mm ARC platforms with minimal influence on bolt velocity and overall system behavior. Its internal architecture integrates a compact baffle geometry with a dedicated gas management approach to reduce backpressure and help limit operator exposure to combustion gases during sustained firing. The suppressor’s exterior geometry is engineered to increase surface area for improved heat dissipation while also reducing light signature and visible flash, even on shorter barrel configurations as low as 10.5 inches. This helps maintain a lower visual and thermal profile in dynamic or low-light environments. Designed for durability under high round counts and full-auto conditions, the CT5P leverages advanced manufacturing methods to achieve strength and longevity without added weight. Tested to rigorous standards, it is purpose-built for duty use, combining compact dimensions, thermal efficiency, and consistent performance in demanding operational environments. SPECS Caliber Rating: 5.56 NATO and 6mm ARC Energy Rating: 2200+ ft-lbs Bore Diameter: 6 mm Length: Direct Thread: 5.49” Materials: Haynes® 282® Finish: Cerakote® Diameter: Direct Thread: 1.6” Minimum Barrel Length Restrictions: No restrictions Full Auto Rated: Full Auto rated for 5.56 NATO and 6mm ARC Silencer Category: Rifle Silencers Weight: Direct Thread: 13.7 oz  

DEAD AIR ARMAMENT CT5P PATROL™ 5.56 NATO/6MM ARC XENO™ RIFLE SUPPRESSOR Introducing the CT5P Patrol™ Silencer, our first patrol-specific, gas-regulated, ultra-lightweight, and low-backpressure compact-Triskelion® baffled 5.56 NATO silencer. Engineered to meet the precise demands of law enforcement officers using semi-automatic duty rifles. It’s designed to minimize hearing-loss risk, reduce muzzle concussion in confined environments, and enhance officer survivability. The CT5P is an ultralight, compact silencer that builds on the lessons learned from the venerable Lazarus 6 and Sandman X series of suppressors to a new level. By removing the HUB feature, the CT5P achieves a shorter, lighter profile with miminal Point of Impact shift. The CT5P is optimized to operate flawlessly with minimal change to bolt velocity on direct impingement and piston gas systems in both 5.56 and 6 ARC. The combination of the patent-pending Compact Triskelion® baffle design and Gas Management System® substantially reduces backpressure and toxicity (fume) exposure for the operator. The CT5P reduces muzzle flash and spark to near undetectable levels for 5.56 NATO rifles with barrel lengths as short as 10.5 inches. Functional aesthetics of the CT5P create more surface area on the outside of the silencer, thereby releasing more heat and minimizing light reflectivity. The CT5P is engineered to achieve a low overall sound pressure level and tone well below the OSHA 1910.95 standard for impulse noise, while reducing toxicity exposure for the operator compared to traditional suppressors. The CT5P is engineered for longevity under full auto fire. Its compact and lightweight design come without compromise due to innovative additive manufacturing technology. Like the operator in the field, CT5P is built for duty use. It has been tested to the SOCOM SURG standard. SPECS Caliber Rating: 5.56 NATO and 6mm ARC Energy Rating: 2200+ ft lbs Bore Diameter: 6MM Length: XENO™: 5.89” Materials: Haynes® 282® Finish: Cerakote® Diameter: XENO™: 1.6" Minimum Barrel Length Restrictions: No restrictions Full Auto Rated: Full Auto rated for 5.56 NATO and 6mm ARC Silencer Category: Rifle Silencers Weight: XENO™: 14.3 oz  

DEAD AIR ARMAMENT RXD910TI 9MM CALIBER DIRECT THREAD SUPPRESSOR The RXD910Ti harnesses the technology of the acclaimed and patented Triskelion® baffle system, making it an incredibly quiet 9mm optimized silencer that also reduces the noise associated with shooting 10mm pistol cartridges. Dead Air uses the power of additive manufacturing to deliver a unique silencer that yields exceptional sound reduction for both 9mm and 10mm-sized projectiles with reduced backpressure and recoil. Dead Air Silencers and Ruger® Firearms are two of the most respected names in the shooting sports industry. These great brands came together to offer an entirely new and exciting product line: RXD Suppressors. Dead Air developed this line of performance-driven suppressors and accessories to complement Ruger’s innovative firearms designs. RXD products are not reskins - they represent a new standard for suppressor design, performance, and maintainability. SPECS Caliber Rating: 5.7x28mm*, 9x19mm, .38 Special, .357 Magnum, 10mm AUTO, .300 Blackout, 400 Legend Energy Rating: 1900 ft-lbs Bore Diameter: 10 mm Length: 7.7” Materials: 6AL4V Titanium Finish: Cerakote® Diameter: 1.48” Minimum Barrel Length Restrictions: None Full Auto Rating: Full Auto* (9mm, 10mm, 5.7x28mm, .300 BLK Subsonic) Silencer Category: RXD Silencers Weight: 11.4 oz  

DEAD AIR ARMAMENT RXD910TI 9MM CALIBER DIRECT THREAD SUPPRESSOR The RXD910Ti harnesses the technology of the acclaimed and patented Triskelion® baffle system, making it an incredibly quiet 9mm optimized silencer that also reduces the noise associated with shooting 10mm pistol cartridges. Dead Air uses the power of additive manufacturing to deliver a unique silencer that yields exceptional sound reduction for both 9mm and 10mm-sized projectiles with reduced backpressure and recoil. Dead Air Silencers and Ruger® Firearms are two of the most respected names in the shooting sports industry. These great brands came together to offer an entirely new and exciting product line: RXD Suppressors. Dead Air developed this line of performance-driven suppressors and accessories to complement Ruger’s innovative firearms designs. RXD products are not reskins - they represent a new standard for suppressor design, performance, and maintainability. SPECS Caliber Rating: 5.7x28mm*, 9x19mm, .38 Special, .357 Magnum, 10mm AUTO, .300 Blackout, 400 Legend Energy Rating: 1900 ft-lbs Bore Diameter: 10 mm Length: 7.7” Materials: 6AL4V Titanium Finish: Cerakote® Diameter: 1.48” Minimum Barrel Length Restrictions: None Full Auto Rating: Full Auto* (9mm, 10mm, 5.7x28mm, .300 BLK Subsonic) Silencer Category: RXD Silencers Weight: 11.4 oz  

Constructed of stainless steel or titanium (see drop-down menu), Daniel SoundGuard Powered by KGM Suppressor 1.375-24 HUB direct-thread adapters are available in in 1/2 - 28" and 5/8 - 24" TPI and provide rock-solid mounting and rapid attachment/detachment. They utilize a non-proprietary flat wrench (included) that attaches or removes the adapter to the suppressor tube or an appropriately threaded firearm muzzle in seconds-no additional or special tools necessary! Because no mounting adapters or other mounting hardware is required, these direct-thread adapters allow the suppressors to be conveniently and easily switched from one firearm to another compatible-caliber firearm with an appropriately threaded muzzle.