Yankee Hill Machine Co VICTRA-12 Mount Assembly, For VICTRA-12 with Beretta Optima Plus Choke, Melonite Finish, Black YHM-1255A

Yankee Hill Machine Co VICTRA-12 Mount Assembly, For VICTRA-12 with Browning Invector Plus Choke, Melonite Finish, Black YHM-1257A

This 1.375"-24 HUB Direct Thread Mount will convert HUB compatible suppressors to a direct thread mounting system. To install simply remove your existing mount mechanism from your suppressor and thread on our HUB Direct Thread Mount using a 3/4" open end wrench then simply thread the suppressor onto your barrel.17-4PH Heat Treated Material Black Oxide 1.375"-24 Mounting Threads .45 Cal Bore Weight: 1.7 oz

This 1.375"-24 HUB Direct Thread Mount will convert HUB compatible suppressors to a direct thread mounting system. To install simply remove your existing mount mechanism from your suppressor and thread on our HUB Direct Thread Mount using a 3/4" open end wrench then simply thread the suppressor onto your barrel.17-4PH Heat Treated Material Black Oxide 1.375"-24 Mounting Threads .45 Cal Bore Weight: 1.7 oz

This 1.375"-24 HUB Direct Thread Mount will convert HUB compatible suppressors to a direct thread mounting system. To install simply remove your existing mount mechanism from your suppressor and thread on our HUB Direct Thread Mount using a 3/4" open end wrench then simply thread the suppressor onto your barrel.17-4PH Heat Treated Material Black Oxide 1.375"-24 Mounting Threads .45 Cal Bore Weight: 1.7 oz

This heavy duty wrench was designed to work with YHM's 1.375"-24 HUB mounting systems. On one side you'll find a 3/4" open ended wrench made to loosen/tighten our Q.D. Mounts and our Direct Thread mounts. On the other a spanner made to fit around our HUB adapters as well as a 1/2" Torque wrench slot to help tighten things to a specific torque spec. Heat treated Melonite QPQ finish HUB Spanner Wrench 3/4" Open Ended Wrench 1/2" Torque Wrench Length: 7.75" Weight: 5.792 Oz.Works perfectly with YHM's Phantom Q.D. mounting system

Yankee Hill Machine Co VICTRA-12 Mount Assembly, For VICTRA-12 with Beretta/Benelli Mobil Choke, Melonite Finish, Black YHM-1256A

The Turbo® K-RB Integrally Suppressed Upper Receiver Group provides a host of benefits in a single package. The Turbo® K-RB Integral comes with a Turbo® K-RB suppressor which is pinned and welded to a 11.5” 5.56mm barrel. With a combined barrel/suppressor length of just over 16” this system only requires a single tax stamp purchase. Includes a lightweight M-LOK® Handguard YHM Mil-Spec A3 upper receiver and a specially designed gas block which reduces blowback and cyclic rates.Does not include Bolt Carrier Assembly or Charging Handle. Caliber: 5.56mm Weight: 3.6 lbs. Length: 23.5” Diameter: 1.5625” Suppressor Construction: 17-4 Ph SS/Cobalt-6 Blast Baffle Decibel Rating: 134 dB 5.56mm Full Auto RatedTurbo® K-RB Integral Suppressed Upper receiver group contains: Integral Turbo® Sound Suppressor Assembly 10" MR7 M-Lok® Handguard Flat Top A3 Upper Receiver Assembly (YHM-100) Low Profile Suppressor Gas Block (YHM-9389-SS) Black Plated Gas Tube (YHM-BL-04A)

The VICTRA-12 Modular Shotgun Suppressor is designed to be taken apart and configured to your desired length, ranging from the default of 12", down to 10", 8" and 6". The VICTRA-12 ships with the 12" Assembly Rods, so here YHM has a set of 10", 8" & 6" for you to have full access to modifying your V-12 suppressor to any length you wish. The kit ships with a pair of each length.

This 5.56 NATO suppressor sports new baffle geometry resulting in reduced blowback. Built with the same care, quality, and attention to detail that has defined the YHM brand for generations, the Fat Cat was created to provide a compact suppressor with great sound. The Fat Cat is made from 17-4 stainless steel along with a heat-treated blast baffle. The combination of these materials allows the suppressor to be -rated and designed for rigorous use. The overall length measures just 4.5" with the sRx adapter installed. That's a full inch shorter than their Turbo K model with its included adapter. The Fat Cat's larger 1.94" diameter creates more internal volume resulting in a lower, more pleasant tone. With an average sound pressure level of 139dB at the muzzle, the Fat Cat is quite the performer for its size. The Fat Cat includes the sRx 1/2" x 28 QD Adapter, Mini sRx Muzzle Brake, (1) YHM-2007 and (1) YHM-2146.

AR-15 Flip Rear Sight- Features of this sight include: a rugged but lightweight design with a steel base, a quick release thumb screw, and aluminum stem. Locks in the deployed position with ease and takes up very little space on the upper receiver.

This durable, all steel sight mount set sits on the same plane to give you a front and back iron sight. The sights fold out of the sight line with the push of a button and flips and locks in the deployed position with ease. Mounts quickly and easily with the included thumb screw. Accepts all standard AR sight posts and hardware (included). Features of these sights include: a rugged but lightweight design with a steel base, a quick release thumb screw, and aluminum stem. Locks in the deployed position with ease and takes up very little space on the upper receiver. Weight: 6 Oz. Mounts to any picatinny rail. Designed to co-witness with the standard M16-M4 front sight and all of their front sights.

Secure your VICTRA-12 modular shotgun suppressor to your mount and host by using our YHM Jam Nut. Included with the purchase of the VICTRA-12 mount.

YHM's Nielsen Pistons are compatible with YHM's booster housing YHM-2055 as well as many popular pistol suppressors. They are constructed from heat treated 17-4 stainless steel for maximum durability and corrosion resistance. They feature 10 adjustment points to zero any impact shift. Available in a variety of thread patterns to fit most firearms.

YHM's Nielsen Pistons are compatible with YHM's booster housing YHM-2055 as well as many popular pistol suppressors. They are constructed from heat treated 17-4 stainless steel for maximum durability and corrosion resistance. They feature 10 adjustment points to zero any impact shift. Available in a variety of thread patterns to fit most firearms.

The durability, reliability and excellent build quality of YHM Suppressors will provide years of service you can count on.

YHM's new .30 caliber sound suppressor, the Resonator(R), was created to provide the shooting enthusiast a quiet, lightweight and cost effective suppressor. Capable of being used on multiple calibers and host weapons, the Resonator(R) can be used on rifle calibers ranging from .17 HMR through 300 RUM making it a great choice for all shooters. Like the Turbo(R), the Resonator(R) uses a tubeless design which consists of heat treated 17-4 stainless steel and a heat treated 718 Inconel blast baffle which allows the suppressor to be full auto rated and designed for rigorous use. Includes YHM-4302 Q.D. Mount of your choice.

Barrel Shim Set to be used to correctly orient a timed muzzle device. This set is used with our 7.62mm Q.D. Muzzle Brakes. This shim kit has an inner diameter of 5/8"

The booster system has been completely redesigned and now uses the industry's unofficial standard piston. The redesign also includes the ability to swap pistons without the use of tools thanks to a new rear cap. The front cap has been redesigned to allow for better engagement with the takedown tool to make the service process easier. The Sidewinder M2 is user serviceable which allows both the baffle and Nielsen device to be removed for cleaning and maintenance using the provided disassembly tool. The Nielsen piston (device) enables flawless semi-automatic operation on all relevant host pistols. The Sidewinder M2 has 12 index points that allow you to adjust point of impact while remaining attached to the host firearm. The average dry sound signature of the Sidewinder M2 .45 when testing to Mil-Std 1474D is 133 dB dry on a Glock G21 using 230gr. FMJ ammo. Shooting the suppressor "wet" will net even quieter results.

High quality components and precise manufacturing make Yankee Hill Machine Co. parts ideal for maintaining and upgrading firearms. The durability, reliability and excellent build quality of these parts will ensure years of service you can count on.

High quality components and precise manufacturing make Yankee Hill Machine Co. parts ideal for maintaining and upgrading firearms. The durability, reliability and excellent build quality of these parts will ensure years of service you can count on.

High quality components and precise manufacturing make Yankee Hill Machine Co. parts ideal for maintaining and upgrading firearms. The durability, reliability and excellent build quality of these parts will ensure years of service you can count on.

Meet The Turbo T3-The newest member of the YHM Turbo suppressor family! This 5.56 NATO Suppressor sports an intentional design improvement to the internal geometry of the baffles-resulting in reduced blowback-when compared to the previous model. Built with the same care, quality, and attention to detail that has defined the YHM brand for generations, the Turbo was originally created to supply the modern suppressor community with a full-featured, American Made suppressor at an affordable price. The Turbo T3 has continued that mission and it's MSRP includes a Q.D. Muzzle Brake -or- Q.D. Flash Hider, a Phantom Q.D. Adapter, and 2 suppressor wrenches. All YHM products are also backed by their Lifetime Manufacturer's Warranty. The Turbo T3 is made from heat-treated 17-4 stainless steel along with a heat-treated 718 Inconel blast baffle. The combination of these materials allows the suppressor to be full auto-rated and designed for rigorous use. The overall length measures 5.59" (6.5" with Phantom Q.D. Adapter) with a 1.5625" diameter -all while weighing in at a surprising 12.8 oz! Having an average sound pressure level of 134dB on a 14.5" AR shooting 55-grain ammo, the Turbo T3 is well within the hearing safe threshold of 140 dB.

Meet The Turbo T3-The newest member of the YHM Turbo suppressor family! This 5.56 NATO Suppressor sports an intentional design improvement to the internal geometry of the baffles-resulting in reduced blowback-when compared to the previous model. Built with the same care, quality, and attention to detail that has defined the YHM brand for generations, the Turbo was originally created to supply the modern suppressor community with a full-featured, American Made suppressor at an affordable price. The Turbo T3 has continued that mission and it's MSRP includes a Q.D. Muzzle Brake -or- Q.D. Flash Hider, a Phantom Q.D. Adapter, and 2 suppressor wrenches. All YHM products are also backed by their Lifetime Manufacturer's Warranty. The Turbo T3 is made from heat-treated 17-4 stainless steel along with a heat-treated 718 Inconel blast baffle. The combination of these materials allows the suppressor to be full auto-rated and designed for rigorous use. The overall length measures 5.59" (6.5" with Phantom Q.D. Adapter) with a 1.5625" diameter -all while weighing in at a surprising 12.8 oz! Having an average sound pressure level of 134dB on a 14.5" AR shooting 55-grain ammo, the Turbo T3 is well within the hearing safe threshold of 140 dB.

This 5.56 NATO Suppressor features reduced blowback-when compared to the previous model. The Turbo K-RB utilizes a tubeless design made from heat treated 17-4 stainless steel along with a heat treated blast baffle. The combination of these materials allows the suppressor to be designed for rigorous use. The blast chamber of the Turbo K-RB is threaded to the popular 1.375"-24 HUB thread which allows it to utilize many available mounting options. The notched rim and tri-port muzzle on the end cap make it stand out among the crowd. The Turbo K-RB is built with the same care, quality, and attention to detail that has defined the YHM brand for generations. The Turbo K-RB ships with the 1/2" x 28 Phantom Q.D. adapter, (1) YHM-2007, (1) YHM-2146, and Q.D. flash hider or QD muzzle brake.