Warne MAXIMA Series rings are designed to mount on Weaver and Picatinny dimension bases and combine the best looks strength and value in the industry. MAXIMA rings are available in both quick detach and permanent attach models. Made from the same process that Porsche and BMW use for their connecting rods these mounts are incredibly strong. Their finish uses a powder coating process that is used by Zeiss and Nikon on their finest scopes.The color and durability is unmatched by any other process. A rectangular stainless steel recoil key is unique to the industry and has proven reliable under the fiercest recoil plus unmatched repeatability when reattached. Remove Reattach Return To Zero : Warne pioneered precision quick detach return-to-zero mounts. Warne's unique design and attention to quality guarantee that optics can be removed and reattached without loosing zero. Adjustable Double Lever System : Warne's unique lever is actually a small box end wrench which is used to tighten or loosen the clamp on the mounting base. It is designed so that the rings can be attached to the scope without removing the clamp assembly simplifying the process of attaching the scope to the rifle. Once attached to the rifle the levers can be easily adjusted to sit in any desired orientation. Stainless Steel Recoil Lug : Warne's Maxima Series features a stainless steel lug that is rectangular and fits perfectly into Weaver-style and Picatinny base configurations. Warne's Grooved Receiver models have lugs that either brace against the back side of the front integral mount or fit into machined slots/holes in the receiver.

Since each firearm manufacturer has their own proprietary mounting rail design each ring model must be machined to exacting tolerances for proper fit and function. Because of this the Warne CZ Rings are able to fit right onto the receiver?s dovetail with no need for a mounting base. The CZ Fixed Rings are available in two different styles to fit either the CZ 550 receiver design (19mm dovetail) or to fit CZ 527 (16mm dovetail) model and utilize 4 T-15 Torx style socket cap screws for secure and permanent optics mounting. Permanently attaches to base. CZ specific recoil pin for positive engagement of ring to receiver dovetail. Rings securely mount around scope using 4 Torx style T-15 socket cap screws 25 in/lb. of torque recommended.

GLOCK 17/22 MAG EXT +5/+4 RED 3115 | +5 9MM | +4 .40

Warne 1-Piece MSR cantilever mounts are constructed from 6061 T6 aluminum for a lightweight and rigid foundation. Steel threaded inserts ensure steel on steel contact between all threaded interfaces and MSR Ideal Height helps the shooter maintain a proper cheek weld and shooting position with any optic on flat top guns The X-SKEL Mount gives additional cantilever while reducing weight with its skeletonized design offering Return-to-Zero scope mount capability that Warne is known for.Lightweight skeletonized aluminum body and caps to reduce overall weight without sacrificing reliability#8 Torx style fasteners with steel threaded inserts to prevent strippingExtended design provides over 2 inches of forward cantilever for additional eye reliefPlaces the optic at the IDEAL HEIGHT for MSR and similar style platformsDual 1/2" tactical nut attachments 65 in/lb of torque recommended

Steel is heavy duty and that comes at the price of weight. In an effort to combat weight while retaining the rock solid performance Warne is known for Warne created the Warne Mountain Tech ring and base line.Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platformMil-Spec hardcoat anodized finish for abrasion and corrosion resistanceBases feature black zinc coated hardware for 'Element Proof' protectionSelf centering tapered T-15 Torx screwsFits Picatinny & Weaver style mounts and are NATO-STANAG compatible

Steel is heavy duty and that comes at the price of weight. In an effort to combat weight while retaining the rock solid performance Warne is known for Warne created the Warne Mountain Tech ring and base line. Mountain Tech rails are available in a 0-MOA for hunters and recreational shooters and a 20-MOA version for long range applications both will benefit from multiple ring positions for perfect alignment and eye relief. They also feature black zinc coated self-centering hardware that eliminates potential base movement under hard use.Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platformMil-Spec hardcoat anodized finish for abrasion and corrosion resistanceBases feature black zinc coated hardware for 'Element Proof' protectionSelf centering tapered T-15 Torx screwsFits Picatinny & Weaver style mounts and are NATO-STANAG compatible

M&P 9/40 MAG EXTENSION FDE 3313 | +5 9MM | +4 .40

MagView B1 XL, Binocular Adapter, MagView Phone Plate, Fits 44MM-48MM Eye Pieces, Black 82016

The Warne Maxima M987M TC Encore Omega & Triumph - The Maxima Steel Bases are modeled around the popular Weaver design which is one of the strongest and most versatile mounting systems available today. The low profile of the Maxima Steel Bases give your firearm a sleek look. When used in conjunction with Warne Maxima QD Rings the shooter is able to utilize the open sights by looking over the top of the bases without sacrificing the normal shooting position behind the firearm. Maxima Bases also offer a full width recoil slot in each base. This feature allows the recoil control keys of Warne Rings to attain maximum bearing surface. Low profile design allows use of iron sights when optics are removed. Full width and depth recoil slots provide maximum bearing surface for recoil key engagement. Bases securely mount to your firearm with Torx-style T-15 socket cap screws 25 in/lb. of torque is recommended.

Maxima M858/918 Fits Ruger 10/22 Maxima Bases - The Maxima Steel Bases are modeled around the popular Weaver design which is one of the strongest and most versatile mounting systems available today. The low profile of the Maxima Steel Bases give your firearm a sleek look. When used in conjunction with Warne Maxima QD Rings the shooter is able to utilize the open sights by looking over the top of the bases without sacrificing the normal shooting position behind the firearm. Maxima Bases also offer a full width recoil slot in each base. This feature allows the recoil control keys of Warne Rings to attain maximum bearing surface. Low profile design allows use of iron sights when optics are removed. Full width and depth recoil slots provide maximum bearing surface for recoil key engagement. Bases securely mount to your firearm with Torx-style T-15 socket cap screws 25 in/lb. of torque is recommended. INSTRUCTIONS - Visually inspect your firearm's receiver for burrs around the screw holes and remove if necessary. Remove all oil and grease from the holes in the receiver the base screws and contact surfaces. Place the scope mount base(s) on the receiver. Check for proper fit and alignment. Using a T-15 wrench (supplied with WARNE rings) loosely install the supplied Torx 15 screws. If base(s) fit properly firmly tighten screws.* Do not use TW1 Torque Wrench Do not exceed 15in/lb torque.*WARNE recommends the use of a REMOVABLE thread locking compound for best results.

The Warne Maxima M902/902 Fits Savage Accu-Trigger Ruger American Centerfire TC Venture Remington 783 Axis/Axis II/Edge - The Maxima Steel Bases are modeled around the popular Weaver design which is one of the strongest and most versatile mounting systems available today. The low profile of the Maxima Steel Bases give your firearm a sleek look. When used in conjunction with Warne Maxima QD Rings the shooter is able to utilize the open sights by looking over the top of the bases without sacrificing the normal shooting position behind the firearm. Maxima Bases also offer a full width recoil slot in each base. This feature allows the recoil control keys of Warne Rings to attain maximum bearing surface. Low profile design allows use of iron sights when optics are removed. Full width and depth recoil slots provide maximum bearing surface for recoil key engagement. Bases securely mount to your firearm with Torx-style T-15 socket cap screws 25 in/lb. of torque is recommended.

MOUNT XSKEL GEN2 30MM MSR RED SKELETONIZED MOUNT

The B1 Binocular Adapter was designed to be the sleekest digiscoping system available on the market. No longer do you have to make the choice between stomping around your spotting scope to film or leaving it behind but missing the opportunity to capture footage at a distance. Impossibly small yet impressively strong, the B1 Adapter seamlessly integrates with your binocular of choice. Slip it onto the eyecup and tighten the retaining screw. That's it. A set it and forget it design does not impede normal use of the binocular, making this tool an efficient and practical addition to your kit. Together with the MAGVIEW Phone Plate, this system creates the ultimate light and fast digiscoping platform for steady, sharp photo and video, every time. B1 - Fits eyepiece sizes 38.5mm-43mm (1.5in-1.7in).

Magview 82052 S1 Sync Self Centering Disc Accessory

Magview 82053 S1 Mini Sync Self Centering Disc Accessory

PMAG 5.56 MAG EXT +5 RED 5005 | +5 rds | RED

The Warne SKYLINE Precision Mount Level attaches exclusively to the top of the Skyline Precision Mount in left or right configurations to keep the scope reticle consistently level.

Versatility and stability Warne Mountain Tech rails offer shooters the advantage of a consistent mounting platform across multiple firearms enhanced ability to adjust proper eye relief and superior alignment of ring mounts. With self-centering hardware and aerospace grade materials our Mountain Tech rails provide a lightweight and robust platform for your rifle. Ounces are pounds Pounds are pain The credo of the backcountry hunter. When tired legs are the only mode of transportation. When the air feels thin and feet feel heavy. When months of preparation training and sleepless nights thinking about the upcoming hunt culminate into a single moment placing the crosshair where it needs to be for the perfect shot. Warne Mountain Tech is the ultimate lightweight precision scope mounting system. Don't leave your dream hunt to chance. When every ounce matters and every shot counts Warne Mountain Tech are the scope mounts you can depend on.Count on a Mountain Tech tactical rail from Warne Scope Mounts for your Savage SA model.Our Mountain Tech line is built to handle the elements without weighing you down. With 7075 aluminum and a mil-spec hardcoat anodized finish it gives you outstanding strength and resistance to abrasion corrosion and the elements but is also surprisingly light weight. Equipped with 8-40 screws it fits Savage SA models with Picatinny or Weaver style rings. Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform Mil-Spec hardcoat anodized finish for abrasion and corrosion resistance. Bases feature black zinc coated hardware for “Element Proof” protection. Self centering tapered T-15 Torx screws. Fits Picatinny & we'ver style mounts and are NATO-STANAG compatible.

TIKKA ALL FLAT TOPS MATTE

VAPOR 34MM SCOPE LEVEL

AFFORDABLE MADE IN USA QUALITY the Warne Vapor line of mounts were developed and engineered to provide you with a strong and economical mounting solution that outperforms other mounts in their class. Stanag 4694 compatible Classic Horizontal Design Easy to install Field proven performance Lightweight aluminum Lifetime warranty Designed and Made in USA

AFFORDABLE MADE IN USA QUALITY Warne Vapor line of mounts were developed and engineered to provide you with a strong and economical mounting solution that outperforms other mounts in their class. Designed to fit 3/8th inch rimfire dovetails Fits Objective Up To: 42mm Time-tested designs Easy to install Field proven performance Lightweight aluminum Lifetime warranty Designed and Made in USA

WARNE BASE MAXIMA 1PC TIKKA MATTE

WARNE BASE MAXIMA 2PC BROWNING BLR STEEL RECEIVER MATTE

WARNE BASE MAXIMA 2PC WBY MARK V MAGNUM MATTE