Reptilia Torch, Fits SureFire M300 Scout Bezels and Tail Caps, Right Side Mount, M-Lok Mounting Hardware Included, Black, Anodized 100-043

Introducing the AUS Mount for 30mm diameter magnified optics, from Reptilia. Driven by the request of an end user group, the AUS Mount is the culmination of a 2 year development program. Like their DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via their anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or a flat blade driver to sit flush with the body of the mount for a low-profile, streamline design. Also like their DOT Mount line, the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.

Introducing the AUS Mount for 30mm diameter magnified optics, from Reptilia. Driven by the request of an end user group, the AUS Mount is the culmination of a 2 year development program. Like the DOT Mount line, the AUS Mount attaches to any M1913 Picatinny rail via the anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or a flat blade driver to sit flush with the body of the mount for a low-profile, streamline design. Also like the DOT Mount line, the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating. The AUS is compatible with all of Reptilia's existing 30mm ROF line, and will be compatible with several new ROF products launching over the coming months. Like all Reptilia products, the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects. Additional heights and optic configurations coming soon!

Introducing the AUS Mount for 34mm diameter magnified optics, from Reptilia. Driven by the request of an end user group, the AUS Mount is the culmination of a 2 year development program. Like their DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via their anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or a flat blade driver to sit flush with the body of the mount for a low-profile, streamline design. Also like their DOT Mount line, the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.

Introducing the next addition to Reptilia's line of AR pattern grips, the CQG-L Grip. The CQG-L has all of the geometry users have loved in the CQG for 4 years now, specifically designed to enhance ergonomics and performance of compact sized short-barreled rifles, AR15 pistols, pistol caliber carbines, and PDWs , with an additional 0.5" of length for those who have larger hands or prefer a longer grip.

The CQG grip has been specifically designed to enhance ergonomics and performance of compact sized short-barreled rifles, AR15 pistols, pistol caliber carbines, and PDWs. The CQG supports a wide range of hand sizes and weapon configurations, featuring a more pronounced vertical grip angle, anti-slip front and rear texture, and an enhanced beaver tail design; the CQG encourages the shooter's hand to be positioned higher on the grip, for greater control and improved comfort.

The CQG grip has been specifically designed to enhance ergonomics and performance of compact sized short-barreled rifles, AR15 pistols, pistol caliber carbines, and PDWs. The CQG supports a wide range of hand sizes and weapon configurations, featuring a more pronounced vertical grip angle, anti-slip front and rear texture, and an enhanced beaver tail design; the CQG encourages the shooter's hand to be positioned higher on the grip, for greater control and improved comfort.

The DOT Mount by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the DOT Mount attaches to any M1913 Picatinny rail, and offers lower 1/3 co-witness with standard AR15-style back-up sights. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design. Like all Reptilia products, the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects. Additional heights and optic configurations coming soon!

Introducing the RECCE Carbine Stock by Reptilia! After more than two years of development and testing, Reptilia is proud to announce the RECCE Stock for AR15/M16 and AR10/SR25 pattern rifles. Designed at the request of a military end user, the RECCE Stock features a constant cheek weld, ambidextrous QD sling attachment points, rubber buttpad, and a modular design that allows usage of a standard AR15 carbine buffer system, or A5/SR25 carbine buffer system by replacing the receiver extension (buffer tube) and forward portion of the stock. Weighing only 12.0 ounces including the proprietary AR15-length receiver extension, the RECCE stock is the ideal lightweight solution for the entire spectrum of AR-pattern guns from compact to precision.

The ROF-90 is a drop-in upgrade for Geissele(R) Automatics' Super Precision optic mount. The ROF-90 adds a mounting point at 90 (12:00) for a Trijicon RMR(R) to provide for quick transition to a non-magnified optic for close-range target engagement. Additionally, the RMR can be zeroed for use with use with subsonic cartridges such as 300 AAC Blackout, while allocating the magnified optic for use with supersonic ammunition. Each ROF model is designed to minimize each optic's distance from the host scope's centerline, while ensuring enough clearance that the sight picture isn't obscured.

The ROF-90 is a drop-in upgrade for Geissele(R) Automatics' Super Precision optic mount. The ROF-90 adds a mounting point at 90 (12:00) for a Trijicon RMR(R) to provide for quick transition to a non-magnified optic for close-range target engagement. Additionally, the RMR can be zeroed for use with use with subsonic cartridges such as 300 AAC Blackout, while allocating the magnified optic for use with supersonic ammunition. Each ROF model is designed to minimize each optic's distance from the host scope's centerline, while ensuring enough clearance that the sight picture isn't obscured.

The ROF-90 is a drop-in upgrade for Geissele(R) Automatics' Super Precision optic mount. The ROF-90 adds a mounting point at 90 (12:00) for a Trijicon RMR(R) to provide for quick transition to a non-magnified optic for close-range target engagement. Additionally, the RMR can be zeroed for use with use with subsonic cartridges such as 300 AAC Blackout, while allocating the magnified optic for use with supersonic ammunition. Each ROF model is designed to minimize each optic's distance from the host scope's centerline, while ensuring enough clearance that the sight picture isn't obscured.

The ROF-90 is a drop-in upgrade for the Reptilia AUS Mount or Geissele Super Precision 34mm magnified optic mounts. The ROF-90 adds options for close-in target engagement and passive aiming with night vision. The ROF-90 for an Aimpoint ACRO or Steiner MPS at 90 (12:00) to add a close-range optic to your magnified scope. Additionally, the ACRO or MPS can be zeroed for use with use with subsonic cartridges such as 300 AAC Blackout, while allocating the magnified optic for use with supersonic ammunition.

The ROF-90 is a drop-in upgrade for the Reptilia AUS Mount or Geissele Super Precision 34mm magnified optic mounts. The ROF-90 adds options for close-in target engagement and passive aiming with night vision. The ROF-90 for an Aimpoint ACRO or Steiner MPS at 90 (12:00) to add a close-range optic to your magnified scope. Additionally, the ACRO or MPS can be zeroed for use with use with subsonic cartridges such as 300 AAC Blackout, while allocating the magnified optic for use with supersonic ammunition.

The ROF-90 is a drop-in upgrade for the Reptilia AUS Mount or Geissele Super Precision 34mm magnified optic mounts. The ROF-90 adds options for close-in target engagement and passive aiming with night vision. The ROF-90 for an Aimpoint ACRO or Steiner MPS at 90 (12:00) to add a close-range optic to your magnified scope. Additionally, the ACRO or MPS can be zeroed for use with use with subsonic cartridges such as 300 AAC Blackout, while allocating the magnified optic for use with supersonic ammunition.

The Socket Mount M-LOK QD attachment point from Reptilia is driven by the request of an end user group for an anti-snag low profile streamline M-LOK attachment.The Socket mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III Class 2 hard anodize coating.Like all Reptilia products the M-LOK QD Sling Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects. Machined from billet 7075-T6 aluminum MIL-STD Type III hardcoat anodized Magpul M-LOK Hardware 12 grams Made in USA

Introducing the Socket Mount M-LOK QD attachment point, from Reptilia. Driven by the request of an end user group, for an anti-snag, low profile, streamline M-LOK attachment. The Socket mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.

Introducing the Saddle Mount for Steiner MPS and Aimpoint ACRO Optics for the Beretta 1301/A300 line of shotguns. Machined from billet 7075-T6 Aluminum and finished with Milspec Type III Hard Coat Anodize, the Saddle is the lowest possible mounting solution for miniature red dot optics utilizing the Aimpoint ACRO footprint, allowing the user to co-witness the factory Beretta iron sights.