This two-die set is intended for reloading bottleneck cases and consists of a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it

This Pocket Scale is ideal for the handloader looking for an affordable rugged scale to verify weightsFeatures: 1500 Grain Capacity 0.10 Grain Accuracy Easy to Read Digital Display Rugged Design Powered by 2-AAA Batteries (Included) Check weight and Powder Pan Included One Year Warranty

The new RCBS AR Series is a must for the progressive reloader. It features a Small Base sizing die and a new Taper Crimp seating die. This combination makes reloading easier for AR-style or semi-auto shooters. The small Base sizer guarantees that the cartridge will rechamber. The Taper Crimp Seater is more forgiving when various case lengths are loaded at the same time. Case neck crimp bulges and buckled shoulders are virtually eliminated when Taper crimping is used with cannelured bullets.2 Die Set Includes:• Small Base Full Length Sizing Die • Taper Crimp Seating DieShell Holder/Shell Plate Sold SeparatelyShell Holder #32 / Item Number #RC09232Shell Plate #32 

RCBS pioneered and developed 3-Die Sets for straight-wall rifle and pistol cases. The Carbide Sizer Die sizes the case and de-primes (the carbide sizer ring eliminates the need to lubricate). The Expander Die expands the case to the proper diameter to accept the bullet and it imparts case mouth flare/bell for bullet feeding. The Seater Die seats the bullet and Tamper crimps.

RCBS pioneered and developed 3-Die Sets for straight-wall rifle and pistol cases. The Carbide Sizer Die sizes the case and de-primes (the carbide sizer ring eliminates the need to lubricate). The Expander Die expands the case to the proper diameter to accept the bullet and it imparts case mouth flare/bell for bullet feeding. The Seater Die seats the bullet and taper crimps.

RCBS pioneered and developed 3-Die Sets for straight-wall rifle and pistol cases. The Carbide Sizer Die sizes the case and de-primes (the carbide sizer ring eliminates the need to lubricate). The Expander Die expands the case to the proper diameter to accept the bullet and it imparts case mouth flare/bell for bullet feeding. The Seater Die seats the bullet and taper crimps.

RCBS pioneered and developed 3-Die Sets for straight-wall rifles and pistol cases. These sets for straight wall pistol cases build off of that legacy. Each set features a steel Sizing die. The Expander die expands the case to the proper diameter to accept the bullet and also imparts case mouth flare/bell for easy bullet feeding. The bullet seating die then seats the bullet and puts on the appropriate crimp for the round being loaded. Features a hardened steel Sizer Die (case lubrication required) Expander Die to properly expand case to accept bullets Taper Crimp Seat Die for Proper cartridge headspacing Comes in a Green Box All RCBS dies are machined to exacting tolerances hardened and finished to the highest standards in the industry 

RCBS AR Series Die Sets are a must for progressive reloaders. They feature a Small Base Sizer Die designed for semi-automatic firearms and a Taper Crimp Seater Die. The Small Base Sizer guarantees the cartridge will rechamber in AR-platform weapon

RCBS pioneered and developed 3-Die Sets for straight-wall rifle and pistol cases. The Carbide Sizer Die sizes the case and de-primes (the carbide sizer ring eliminates the need to lubricate). The Expander Die expands the case to the proper diameter to accept the bullet and it imparts case mouth flare/bell for bullet feeding. The Seater Die seats the bullet and roll crimps.

Getting brass ready to reload used to be a long arduous process. No more. The RCBS Brass Boss features six variable speed rotating stations that completely prepare trimmed brass for reloading all in one stop. The Brass Boss includes tools for all six stations: an inside VLD chamfering tool outside deburring tool primer pocket cleaner (small/large) military crimp remover (small/large) primer pocket uniformer (small/large) case neck brushes (four diameters) and a tub of dry case neck lubricant. Save time elbow grease and process brass efficiently with Brass Boss. Six variable high-speed rotating stations (four at <350 rpm; two at <550 rpm) Two fixed stations for case neck brushes Tools included for all stations Storage area for tools not in use 120-240 VAC for operation in multiple countries US UK EU and Australian power cords 2-year limited warranty

Replacement carbide tipped cutters for your Case Trimmer 3-Way Cutter and Trim Mate Chamfer or Debur tool. These carbide tipped tools cut clean and stay sharp for a lifetime of use.

The RCBS .17 - .60 Caliber Deburring Tool is just the tool you need to simultaneously chamfer and deburr the outside and inside of your cartridge cases. This particular tool is larger than the standard RCBS Deburring tool designed specifically for hand reloading of cases larger than .45 caliber. If you are in need of a multipurpose deburring tool that does it all look no further than the RCBS .17 - .60 Caliber Deburring Tool. Not only does this tool chamfer and deburr the outside and inside of your cases all at once but it is made from hardened steel to ensure a lifetime of durability and performance.

F L DIE SET 6MM CREEDMOOR

These RCBS two die-sets are intended for reloading bottleneck cases and consist of a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. This die sizes the outside of the case de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full-length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated. Standard 7/8"-14 Thread Proprietary Die Steel Set includes Full-Length Sizing die and Bullet Seating Die Sizing die brings cases to SAAMI minimum cartridge dimensions Ships in Green Die Box

This two-die set is intended for reloading bottleneck cases and consists of a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it

This two-die set is intended for reloading bottleneck cases and consists of a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it

RCBS Full-Length die sets are machined from their proprietary die steel to exacting tolerances then undergo a meticulous finishing process to give the hand-loader the best dies on the market. Each Full-Length set includes a Full-Length sizing die and Bullet Seating Die.

The RCBS Flash Hole Case Pilot Stop is a caliber-specific tool perfectly suited to use with the RCBS Flash Hole Deburring Tool which helps to reduce case variation. The RCBS Flash Hole Deburring Tool serves to remove excess brass from the flash hole of cases to increase consistency and improve accuracy.When using the RCBS Flash Hole Deburring Tool you need an RCBS Flash Hole Case Pilot Stop to adapt the tool to the specific caliber of the cases you are reloading. The RCBS Flash Hole Case Pilot Stop comes in a variety of sizes to accommodate all of the most popular calibers.

The new M1000 mechanical scale gives users 1000-grain capacity with + / - 0.1-grain accuracy plus right or left-handed operation. It offers magnetic damping for fast readings and maintenance-free movement. A metal tip-proof pan makes loading easy.

The M500 mechanical scale provides right or left-handed operation and a wealth of big-time features at an affordable price. Featuring a proven two-poise design that lets you weigh up to 505 grains with + / - 0.1-grain accuracy the M500 also offers RCBS’ magnetic damping system for fast readings and maintenance-free movement. The tip-proof metal pan makes loading easier and a rugged die cast aluminum base even features a grain-to-gram conversion table to aid in calculations and recipe conversions. 505-grain capacity Accurate to within 0.1 grain Right- or left-handed operation Two-poise design Magnetic dampening Leveling foot Ambidextrous metal scale pan Grain-to-gram conversion chart

To determine the proper neck bushing size measure the outside neck diameter of a loaded cartridge and subtract .002" to .003" to allow for a small amount of brass spring back.

To determine the proper neck bushing size measure the outside neck diameter of a loaded cartridge and subtract .002" to .003" to allow for a small amount of brass spring back.

Matchmaster dies are the pinnacle of reloading dies with rich features outstanding fit and finish and unbeatable accuracy.Available in both full-length size and neck-size sets as well as a stand-alone seater die you will enjoy years of use from Matchmaster dies. Each die is made from case hardened steel the inside surfaces are precision-drilled and reamed to exacting standards and hand polished.Matchmaster sizing dies use interchangeable neck bushings (sold separately). This changeable diameter neck bushing has been used by benchrest and long-range precision shooters for years. This allows you to change the self-centering changeable neck bushing to precisely set the amount of tension on the bullet. It also keeps the brass working to a minimum to extend the life of your cases.The Matchmaster seater die is beautifully machined polished and finished off with a deep blued finish like on the finest firearms. The large oversized adjustment knob on the Matchmaster seater die has oversized letters and hash marks making it both precise to turn as well as easy to read. Dial one thousandth of an inch and that is exactly what you will get.The seater also features our exclusive loading window which allows you to drop the bullet in and simply run the press to seat your bullet. No more trying to balance a bullet on a case mouth or putting fingers in danger. The internal sleeve catches and holds the bullet in perfect alignment with the case and guides it during the seating operation for astoundingly concentric results.

The RCBS MatchMaster Die is a combination of the best features from both the Gold Medal and Competition series. 

The RCBS MatchMaster Die is a combination of the best features from both the Gold Medal and Competition series.