Gemtech Piston for GM-45, Lunar-45 and Blackside-45 LID (M16x1mm LH) Caliber Sound Reduction Diameter Length Weight Mount Material Full Auto Rated Finish Thread size M16x1mm LH Can also use on 40 caliber and 9mm pistols. All options can be installed in the field without the use of tools.

Gemtech Tri-Lock .338 Lapua Magnum Muzzle Brake Caliber - 338 LAPUA Sound Reduction - Diameter - Length - Weight - Mount Material Full Auto Rated Finish Comes in three separate thread pitches: 3/4-24, 5/8-24, & M18x1.5 Right Hand Accessory Fits Gemtech Arrow Quick Mount Suppressor

GEMTECH 13819 ETM SYSTEM HUB THREAD QD

GEMTECH HUB THREADS DIRECT THREAD ADAPTER TO 5/8 X 24 13891

Gemtech Nebula, Suppressor, 5.7X28MM, Removable Direct Thread Mount, 1/2X28, Titanium, Cerakote Finish, Black, 9oz 14166

Gemtech NEUTRINO, Suppressor, .30 Cal, 6.5" Length, Titanium Construction, Cerakote Finish, Black, HUB Compatible, Includes 5/8X24 Direct Thread Mount, 8.8oz with Mount 14676

GEMTECH SHIMSET 7.62MM (5/8-24) 3013333

GVAC UPPER GROUP 5.56MM 14.5"

The GEMTECH 22 QDA is a universal adapter for all rimfire silencers that allow attachment and detachment quickly and efficiently. The four lug muzzle device is threaded 1/2-28 to mount on all standard rimfire threaded barrels for maximum compatibility. The QDA mount is threaded 1/2-28 for use in all rimfire silencers in 22LR and 22MAG. The 22 QDA will allow you to switch firearms quickly and still maintain complete control.

The 22-QDA four lug muzzle device is threaded 1/2-28 to mount on all standard rimfire threaded barrels for maximum compatibility.

This mount screws into the rear of all GM-9, MULTIMOUNT and older TRINITY suppressors to allow use on the HK MP5 barrel with 3-Lug as well as other barrels modified with Gemtech's male 3-lug adapters.

Featuring five of Gemtech's latest patent-pending technologies, the Abyss 5.56 & 7.62 are destined to redefine the hard-use suppressor category. Their proprietary design reduces muzzle flash and decibels while also reducing gas blowback for improved user comfort and host reliability. High Efficiency Baffle Design - For high sound reduction. Low Back Pressure Design-For greater host reliability and shooter comfort. GM-S1 End Cap Design- For minimized muzzle flash from the first shot to the last.

Featuring five of Gemtech's latest patent-pending technologies, the Abyss 5.56 & 7.62 are destined to redefine the hard-use suppressor category. Their proprietary design reduces muzzle flash and decibels while also reducing gas blowback for improved user comfort and host reliability. High Efficiency Baffle Design - For high sound reduction. Low Back Pressure Design-For greater host reliability and shooter comfort. GM-S1 End Cap Design- For minimized muzzle flash from the first shot to the last.

Threaded End Cap adapters for use with the GM-45 and Blackside suppressors. These allow the use of the suppressor on Fixed barreled weapons.

Introducing the new GVAC system from Gemtech. Significantly reduce the amount of gas blowback you'll experience wwhen shooting suppressed with its patented design. The re-imagined barrel profile enhanced bolt carrier profile enhanced bolt carrier group and ETM muzzle device maximize peformance so nothing holds you back. Redefine suppressed shooting with the GVAC system. UPPER RECEIVER - Mil-Spec with Indexing Marks and M4 Feed Ramps. 7075-T6 Aluminum Type III Hard Coat Anodized BARREL - 4150CMV Steel Stress Relieved Armornite Treated 1:8 Twist 5R Rifled GVAC Profile Nickle Boron Coated  barrel Extension 1/2X28 TPI Muzzle Threads GAS SYSTEM - Pinned Low-Pro GVAC Gas Block 4140CM Steel Mid-Length GVAC Direct-Impingement MUZZLE DEVICE - Gemtech ETM Flash Hider 4140CM Steel BOLT CARRIER GROUP - Carpenter 158 steel bolt 8620 Steel Carrier Mil-Spec MP Tested Mag-Phos Finish Chrome Lined Properly staked Gas Key Enhanced reliability bolt carrier and chrome firing pin. HANDGUARD - 15” Midwest Industries Combat M-LOK Free-Float SevenSided M-LOK hand guard. Continuous MIL-STD 1913 Picatinny Top Rail Integrated QD sling sockets. Machined from 6061-T6 Aluminum and Type III Hard Coat Anodized.

The Gemtech Lunar 9 suppressor delivers the internal volume and turbulence needed for serious sound suppression with both 9mm and 300BLK subsonic cartridges. The Lunar 9's internal design ensures optimal baffle alignment for easy disassembly and cleaning.

Featuring four of Gemtech's latest patent-pending technologies, the versatile Neutron 7.62 strikes the perfect balance between size, strength, and weight. From a short-barreled machine gun to a favorite hunting rifle, the Neutron accepts a wide range of mounting hardware to better suit the host and task at hand. Its refined baffle and end cap helps significantly minimize muzzle signature while its thick tubeless design sheds needless weight.

The NEW GEMTECH flash hiders are the culmination of user feedback, extensive testing, and decades of experience. The new flash hiders are more aggressive than ever to cut down on carbon build-up in your suppressor and to prevent it from getting stuck. All 5.56mm QUICKMOUNTS fit the M4-96D, G5, G5-T, SHIELD, HVT-QM, QUICKSAND and ONE suppressors.

The new GEMTECH Muzzle Brake is for users who want less felt recoil, less muzzle climb, and faster follow up shots. All 5.56mm QUICKMOUNTS fit the M4-96D, G5, G5-T, SHIELD, HVT-QM, QUICKSAND and ONE suppressors.

The new GEMTECH Muzzle Brake is for users who want less felt recoil, less muzzle climb, and faster follow up shots, this is the device for you. Quick mount lugs for use with TPR-S, HVT-QM, QUICKSAND, and ONE suppressors.

The unique G-Core design enables the user to easily maintain their silencer while still providing the best noise reduction in the industry.

The GEMTECH Tracker was designed for military snipers and has been adapted to suit the U.S. hunter market. The Tracker is only 11.3 ounces so it doesn't add too much weight to lightweight barrels. Being 300WM rated means the Tracker is ready to help you take your next big game.

The TREK is a compact and rugged thread mount suppressor for 5.56MM rifles and is suitable for full auto and shorter barrel (10.3" or greater) carbines. The TREK is made of rugged 17-4 stainless steel, with non-welded construction. New design allows for easy pinning to 11" or longer barrels to meet non-SBR overall length requirements.

The Threaded Endcap Adapter to use on GM-9 and MULTIMOUNT suppressors when used with fixed barrel carbines and SMGs.

The Threaded Endcap Adapter to use on GM-9 and MULTIMOUNT suppressors when used with fixed barrel carbines and SMGs. The 5/8-24 mount is for use with .300 Whisper and .300 Blackout carbines using SUBSONIC AMMO ONLY.NOTE: Most handguns require the use of Gemtech's LID mount for proper function.