DEAD AIR ARMAMENT CT5P 5.56 NATO/6MM ARC DIRECT THREAD RIFLE SUPPRESSOR Introducing the CT5P Patrol™ Silencer, our first patrol-specific, gas-regulated, ultra-lightweight, and low-backpressure compact-Triskelion® baffled 5.56 NATO silencer. Engineered to meet the precise demands of law enforcement officers using semi-automatic duty rifles. It’s designed to minimize hearing-loss risk, reduce muzzle concussion in confined environments, and enhance officer survivability. The CT5P is an ultralight, compact suppressor engineered to deliver next-generation performance in a reduced-size platform. Building on proven design lessons from prior suppressor generations, it eliminates the HUB interface to achieve a shorter, lighter configuration while maintaining minimal point-of-impact shift and consistent alignment under use. Optimized for both direct impingement and piston-driven systems, the CT5P is designed to function reliably in 5.56 NATO and 6mm ARC platforms with minimal influence on bolt velocity and overall system behavior. Its internal architecture integrates a compact baffle geometry with a dedicated gas management approach to reduce backpressure and help limit operator exposure to combustion gases during sustained firing. The suppressor’s exterior geometry is engineered to increase surface area for improved heat dissipation while also reducing light signature and visible flash, even on shorter barrel configurations as low as 10.5 inches. This helps maintain a lower visual and thermal profile in dynamic or low-light environments. Designed for durability under high round counts and full-auto conditions, the CT5P leverages advanced manufacturing methods to achieve strength and longevity without added weight. Tested to rigorous standards, it is purpose-built for duty use, combining compact dimensions, thermal efficiency, and consistent performance in demanding operational environments. SPECS Caliber Rating: 5.56 NATO and 6mm ARC Energy Rating: 2200+ ft-lbs Bore Diameter: 6 mm Length: Direct Thread: 5.49” Materials: Haynes® 282® Finish: Cerakote® Diameter: Direct Thread: 1.6” Minimum Barrel Length Restrictions: No restrictions Full Auto Rated: Full Auto rated for 5.56 NATO and 6mm ARC Silencer Category: Rifle Silencers Weight: Direct Thread: 13.7 oz  

DEAD AIR ARMAMENT CT5P 5.56 NATO/6MM ARC DIRECT THREAD RIFLE SUPPRESSOR Introducing the CT5P Patrol™ Silencer, our first patrol-specific, gas-regulated, ultra-lightweight, and low-backpressure compact-Triskelion® baffled 5.56 NATO silencer. Engineered to meet the precise demands of law enforcement officers using semi-automatic duty rifles. It’s designed to minimize hearing-loss risk, reduce muzzle concussion in confined environments, and enhance officer survivability. The CT5P is an ultralight, compact suppressor engineered to deliver next-generation performance in a reduced-size platform. Building on proven design lessons from prior suppressor generations, it eliminates the HUB interface to achieve a shorter, lighter configuration while maintaining minimal point-of-impact shift and consistent alignment under use. Optimized for both direct impingement and piston-driven systems, the CT5P is designed to function reliably in 5.56 NATO and 6mm ARC platforms with minimal influence on bolt velocity and overall system behavior. Its internal architecture integrates a compact baffle geometry with a dedicated gas management approach to reduce backpressure and help limit operator exposure to combustion gases during sustained firing. The suppressor’s exterior geometry is engineered to increase surface area for improved heat dissipation while also reducing light signature and visible flash, even on shorter barrel configurations as low as 10.5 inches. This helps maintain a lower visual and thermal profile in dynamic or low-light environments. Designed for durability under high round counts and full-auto conditions, the CT5P leverages advanced manufacturing methods to achieve strength and longevity without added weight. Tested to rigorous standards, it is purpose-built for duty use, combining compact dimensions, thermal efficiency, and consistent performance in demanding operational environments. SPECS Caliber Rating: 5.56 NATO and 6mm ARC Energy Rating: 2200+ ft-lbs Bore Diameter: 6 mm Length: Direct Thread: 5.49” Materials: Haynes® 282® Finish: Cerakote® Diameter: Direct Thread: 1.6” Minimum Barrel Length Restrictions: No restrictions Full Auto Rated: Full Auto rated for 5.56 NATO and 6mm ARC Silencer Category: Rifle Silencers Weight: Direct Thread: 13.7 oz  

DEAD AIR ARMAMENT CT5P 5.56 NATO/6MM ARC DIRECT THREAD RIFLE SUPPRESSOR Introducing the CT5P Patrol™ Silencer, our first patrol-specific, gas-regulated, ultra-lightweight, and low-backpressure compact-Triskelion® baffled 5.56 NATO silencer. Engineered to meet the precise demands of law enforcement officers using semi-automatic duty rifles. It’s designed to minimize hearing-loss risk, reduce muzzle concussion in confined environments, and enhance officer survivability. The CT5P is an ultralight, compact suppressor engineered to deliver next-generation performance in a reduced-size platform. Building on proven design lessons from prior suppressor generations, it eliminates the HUB interface to achieve a shorter, lighter configuration while maintaining minimal point-of-impact shift and consistent alignment under use. Optimized for both direct impingement and piston-driven systems, the CT5P is designed to function reliably in 5.56 NATO and 6mm ARC platforms with minimal influence on bolt velocity and overall system behavior. Its internal architecture integrates a compact baffle geometry with a dedicated gas management approach to reduce backpressure and help limit operator exposure to combustion gases during sustained firing. The suppressor’s exterior geometry is engineered to increase surface area for improved heat dissipation while also reducing light signature and visible flash, even on shorter barrel configurations as low as 10.5 inches. This helps maintain a lower visual and thermal profile in dynamic or low-light environments. Designed for durability under high round counts and full-auto conditions, the CT5P leverages advanced manufacturing methods to achieve strength and longevity without added weight. Tested to rigorous standards, it is purpose-built for duty use, combining compact dimensions, thermal efficiency, and consistent performance in demanding operational environments. SPECS Caliber Rating: 5.56 NATO and 6mm ARC Energy Rating: 2200+ ft-lbs Bore Diameter: 6 mm Length: Direct Thread: 5.49” Materials: Haynes® 282® Finish: Cerakote® Diameter: Direct Thread: 1.6” Minimum Barrel Length Restrictions: No restrictions Full Auto Rated: Full Auto rated for 5.56 NATO and 6mm ARC Silencer Category: Rifle Silencers Weight: Direct Thread: 13.7 oz  

DEAD AIR ARMAMENT CT5P 5.56 NATO/6MM ARC DIRECT THREAD RIFLE SUPPRESSOR Introducing the CT5P Patrol™ Silencer, our first patrol-specific, gas-regulated, ultra-lightweight, and low-backpressure compact-Triskelion® baffled 5.56 NATO silencer. Engineered to meet the precise demands of law enforcement officers using semi-automatic duty rifles. It’s designed to minimize hearing-loss risk, reduce muzzle concussion in confined environments, and enhance officer survivability. The CT5P is an ultralight, compact suppressor engineered to deliver next-generation performance in a reduced-size platform. Building on proven design lessons from prior suppressor generations, it eliminates the HUB interface to achieve a shorter, lighter configuration while maintaining minimal point-of-impact shift and consistent alignment under use. Optimized for both direct impingement and piston-driven systems, the CT5P is designed to function reliably in 5.56 NATO and 6mm ARC platforms with minimal influence on bolt velocity and overall system behavior. Its internal architecture integrates a compact baffle geometry with a dedicated gas management approach to reduce backpressure and help limit operator exposure to combustion gases during sustained firing. The suppressor’s exterior geometry is engineered to increase surface area for improved heat dissipation while also reducing light signature and visible flash, even on shorter barrel configurations as low as 10.5 inches. This helps maintain a lower visual and thermal profile in dynamic or low-light environments. Designed for durability under high round counts and full-auto conditions, the CT5P leverages advanced manufacturing methods to achieve strength and longevity without added weight. Tested to rigorous standards, it is purpose-built for duty use, combining compact dimensions, thermal efficiency, and consistent performance in demanding operational environments. SPECS Caliber Rating: 5.56 NATO and 6mm ARC Energy Rating: 2200+ ft-lbs Bore Diameter: 6 mm Length: Direct Thread: 5.49” Materials: Haynes® 282® Finish: Cerakote® Diameter: Direct Thread: 1.6” Minimum Barrel Length Restrictions: No restrictions Full Auto Rated: Full Auto rated for 5.56 NATO and 6mm ARC Silencer Category: Rifle Silencers Weight: Direct Thread: 13.7 oz  

DEAD AIR ARMAMENT CT5P PATROL™ 5.56 NATO/6MM ARC XENO™ RIFLE SUPPRESSOR Introducing the CT5P Patrol™ Silencer, our first patrol-specific, gas-regulated, ultra-lightweight, and low-backpressure compact-Triskelion® baffled 5.56 NATO silencer. Engineered to meet the precise demands of law enforcement officers using semi-automatic duty rifles. It’s designed to minimize hearing-loss risk, reduce muzzle concussion in confined environments, and enhance officer survivability. The CT5P is an ultralight, compact silencer that builds on the lessons learned from the venerable Lazarus 6 and Sandman X series of suppressors to a new level. By removing the HUB feature, the CT5P achieves a shorter, lighter profile with miminal Point of Impact shift. The CT5P is optimized to operate flawlessly with minimal change to bolt velocity on direct impingement and piston gas systems in both 5.56 and 6 ARC. The combination of the patent-pending Compact Triskelion® baffle design and Gas Management System® substantially reduces backpressure and toxicity (fume) exposure for the operator. The CT5P reduces muzzle flash and spark to near undetectable levels for 5.56 NATO rifles with barrel lengths as short as 10.5 inches. Functional aesthetics of the CT5P create more surface area on the outside of the silencer, thereby releasing more heat and minimizing light reflectivity. The CT5P is engineered to achieve a low overall sound pressure level and tone well below the OSHA 1910.95 standard for impulse noise, while reducing toxicity exposure for the operator compared to traditional suppressors. The CT5P is engineered for longevity under full auto fire. Its compact and lightweight design come without compromise due to innovative additive manufacturing technology. Like the operator in the field, CT5P is built for duty use. It has been tested to the SOCOM SURG standard. SPECS Caliber Rating: 5.56 NATO and 6mm ARC Energy Rating: 2200+ ft lbs Bore Diameter: 6MM Length: XENO™: 5.89” Materials: Haynes® 282® Finish: Cerakote® Diameter: XENO™: 1.6" Minimum Barrel Length Restrictions: No restrictions Full Auto Rated: Full Auto rated for 5.56 NATO and 6mm ARC Silencer Category: Rifle Silencers Weight: XENO™: 14.3 oz  

Dead Air Armament Detent Ring, Black, KeyMo and KeyMicro Adapters DA012

Dead Air Armament Hub, Direct Thread Mount, 1/2X28, Black LT301

Dead Air Armament Key-Micro Adapter for Ghost-M / Wolf 9SD / Wolfman DA451

Dead Air Armament KeyMicro GOV Flash Hider, 9MM, 1/2X28 Thread Pitch, Nitride Finish, Black DA115GOV

Dead Air Armament KeyMicro GOV Flash Hider, 9MM, 5/8X24 Thread Pitch, Nitride Finish, Black DA116GOV

Dead Air Armament KeyMo Flash Hider, M15X1 LH, Black Finish DA304

Dead Air Armament KeyMo GOV Flash Hider, 6MM, 1/2X28 Thread Pitch, Nitride Finish, Black DA301GOV

Dead Air Armament KeyMo GOV Flash Hider, .30 Cal, 5/8X24 Thread Pitch, Nitride Finish, Black DA302GOV

Dead Air Armament Muzzle Brake Mount, 7.62MM, 5/8X24, Fits Sandman DA102

Dead Air Armament Key Mount, Zero, 45 Caliber, .578X28, Nitride Finish, Black DA322

Dead Air Armament Key Mount, Zero, 30 Caliber, 1/2X28, Nitride Finish, Black DA320

Dead Air Armament Key Mount, Zero, 45 Caliber, 11/16X24, Nitride Finish, Black DA324

Dead Air Armament Key Mount, Zero, 45 Caliber, 5/8X24, Nitride Finish, Black DA321

Dead Air Armament Key Mount, Zero, 9MM/.357, 9/16X24, Nitride Finish, Black DA323

Dead Air Armament Ghost / Wolfman Booster Assembly SD500

Dead Air Armament Front Cap, Fits Dead Air Sandman/Pyro, 5.56MM, Black Finish DA206

Dead Air Armament Front Cap, Fits Dead Air Sandman/Pyro, 7.62MM, Black Finish DA207

Dead Air Armament R Series, Front Cap, 30 Caliber, Fis Dead Air Nomad, Black DA209A

DEAD AIR ARMAMENT RXD910TI 9MM CALIBER DIRECT THREAD SUPPRESSOR The RXD910Ti harnesses the technology of the acclaimed and patented Triskelion® baffle system, making it an incredibly quiet 9mm optimized silencer that also reduces the noise associated with shooting 10mm pistol cartridges. Dead Air uses the power of additive manufacturing to deliver a unique silencer that yields exceptional sound reduction for both 9mm and 10mm-sized projectiles with reduced backpressure and recoil. Dead Air Silencers and Ruger® Firearms are two of the most respected names in the shooting sports industry. These great brands came together to offer an entirely new and exciting product line: RXD Suppressors. Dead Air developed this line of performance-driven suppressors and accessories to complement Ruger’s innovative firearms designs. RXD products are not reskins - they represent a new standard for suppressor design, performance, and maintainability. SPECS Caliber Rating: 5.7x28mm*, 9x19mm, .38 Special, .357 Magnum, 10mm AUTO, .300 Blackout, 400 Legend Energy Rating: 1900 ft-lbs Bore Diameter: 10 mm Length: 7.7” Materials: 6AL4V Titanium Finish: Cerakote® Diameter: 1.48” Minimum Barrel Length Restrictions: None Full Auto Rating: Full Auto* (9mm, 10mm, 5.7x28mm, .300 BLK Subsonic) Silencer Category: RXD Silencers Weight: 11.4 oz  

DEAD AIR ARMAMENT RXD910TI 9MM CALIBER DIRECT THREAD SUPPRESSOR The RXD910Ti harnesses the technology of the acclaimed and patented Triskelion® baffle system, making it an incredibly quiet 9mm optimized silencer that also reduces the noise associated with shooting 10mm pistol cartridges. Dead Air uses the power of additive manufacturing to deliver a unique silencer that yields exceptional sound reduction for both 9mm and 10mm-sized projectiles with reduced backpressure and recoil. Dead Air Silencers and Ruger® Firearms are two of the most respected names in the shooting sports industry. These great brands came together to offer an entirely new and exciting product line: RXD Suppressors. Dead Air developed this line of performance-driven suppressors and accessories to complement Ruger’s innovative firearms designs. RXD products are not reskins - they represent a new standard for suppressor design, performance, and maintainability. SPECS Caliber Rating: 5.7x28mm*, 9x19mm, .38 Special, .357 Magnum, 10mm AUTO, .300 Blackout, 400 Legend Energy Rating: 1900 ft-lbs Bore Diameter: 10 mm Length: 7.7” Materials: 6AL4V Titanium Finish: Cerakote® Diameter: 1.48” Minimum Barrel Length Restrictions: None Full Auto Rating: Full Auto* (9mm, 10mm, 5.7x28mm, .300 BLK Subsonic) Silencer Category: RXD Silencers Weight: 11.4 oz